Manufacturers

KIT-SAKURA-S 3RACING Sakura Zero S 1/10 Touring Car

KIT-SAKURA-S 3RACING Sakura Zero S 1/10 Touring Car

Lebih detail


Rp. 1,200,000

Ketersediaan: Barang ini telah habis.

Sakura Zero is popular among drivers with positive feedback, it also gains reputation by winning champions worldwide. 3Racing is now going to release an entry level 1/10 on road car kit- Sakura Zero S for elementary drivers as an introduction of competition car with highly affordable price. Sakura Zero S keep utilizing the chassis design of Sakura Zero and select the plastic with best quality as its material, which has proven by thousands tests on tracks that the performance and durability are far more than satisfactory.
The parts of Sakura Zero S and Sakura Zero are interchangeable. As the new car kit is not included assembly, drivers need to construct the chassis themselves, apart from the joy and satisfaction gained from the process, drivers can feasibly upgrade the parts to Sakura Zero.

Feature:
Sakura Zero S features 2.5mm FRP chassis and 2.00mm FRP long-cutting upper deck, 3.0mm front and rear FRP Shock Tower, pink anodized aluminum motor mount, 2 belt drive system, front and rear gear differentials, full ball bearings, front universal shaft and rear dog bone, steel turn buckles, plastic quick change differential cover, Li-po and Sub-C battery holder with battery strap, plastic fixed suspension mount, oil damper, tires and rims.
2.5mm FRP chassis is specially made for Sub-C battery, drivers can change to use Li-po by their own preference.
The chassis is cut uniquely based on FRP 's characteristics, hardness and durability are highly boosted
Both the front and rear shock tower are made of 3.0mm FRP, there are 4 settings and 6 settings for adjusting damper angles at the front and rear respectively.
Motor mount is made from CNC machined aluminum for hardness and durability, resulting in good heat loss performance. Anodized pink body makes it look remarkable.
Two belt system provides quiet and smooth run
Differential is of lightweight design for competition use
Universal shaft and dog bone are made of steel, which greatly boost its hardness and durability.
The chassis is equipped with 16 pieces ball bearing with different sizes, which makes the car runs smooth with best performance.
Turn buckle is made from steel with extreme stiffness, its counterclockwise design is easy for adjustment.
Battery tray contains two adapters for Sub-C battery and Li-po battery, a battery strap is included for fixing the battery position.
4 suspension mounts with one additional 3 degree suspension mount are consisted, they are made from rigid nylon material for competition use.
Plastic Damper continuously usesthe design of SAKURA ZERO
Ball stud set up is applied to entre chassis

Specification:
Overall Length: 343mm
Overall Width: 188mm
Wheelbase 257mm
Tread (F/R): 163 F/R
Gear Ratio: 1.9:1 (38T/20T)

Include:
3Racing Sakura Zero S 1/10 Touring Car
Wheels (4 pcs)
Instruction

Require:
Phillips Wrench 1.5mm-2.5mm & 2.0mm-3.0mm
Wire Cutter
Pliers
Tweezers
Body Reamer
Hobby Knife
Scissors
CA Glue
Thread Lock

Cart  

No products

Shipping Rp. 0
Total Rp. 0

Cart Check out

Online Status

Chat with me

 

User Online

 
User Online: 6
Today Visits: 43
Total Visits: 438383
Your IP: 54.167.10.244

Cek Airway Bill

Cek AWB